Product ID:SCOTCH-WELD EC-2214 REGULAR EPOXY ADHESIVE
MSDS Date:01/04/1990
FSC:8040
NIIN:01-046-1742
MSDS Number: BMQLQ

3M CO. AEROSPACE MATERIALS DEPARTMENT

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 0KHE3

MINNESOTA MINING AND MFG CO AEROSPACE MATERIALS DEPT

SAINT PAUL, MN 55144-1000 US

Telephone: 612-737-4114/612-733-1110

Cage: 0KHE3

EPOXY RESIN

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 40-50%

ALUMINUM PIGMENTS (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 30-40%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

EPOXY RESIN

CAS: 9072-62-2

Fraction By Weight: 1-10%

DICYANDIAMIDE

CAS: 461-58-5

RTECS: ME9950000

Fraction By Weight: 1-10%

SYNTHETIC ELASTOMER (TRADE SECRET)

Fraction By Weight: 1-10%

AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

OSHA PEL 6 MG/M3

ACGIH TLV: 3 MG/M3

PARA-CHLOROPHENOL-DIMETHYLUREA

CAS: 150-68-5

RTECS: YS6300000

Fraction By Weight: 1-10%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:EYE: IRRITATION FROM CONTACT OR
(GRINDING) DUST. SKIN: MAY CAUSE IRRITATION. MAY CAUSE DERMATITIS
(DRYING & CRACKING) AND ALLERGIC REACTION. INHALE: CURING VAPORS
MAY CAUSE RESPIRATORY SYSTEM IRRITATI ON, DUST MAY CAUSE
IRRITATION. INGEST: DIGESTIVE SYSTEM IRRITATION.
Explanation of Carcinogenicity:PARA-CHLOROPHENOL-DEMETHYL UREA IS A
SUSPECT CARCINOGEN BASED ON LAB ANIMAL STUDIES. NO EXPOSURE
W/NORMAL USE OF PRODUCT

First Aid:EYE: IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 10 MIN.
CALL A PHYSICIAN. SKIN: WASH WITH SOAP & WATER. REMOVE CONTAMINATED
CLOTHING AND LAUNDER BEFORE REUSE. INHALE: PROVIDE FRESH AIR. CALL
A PHY SICIAN. INGESTION: DO NOT INDUCE VOMITING. IMMEDIATELY CALL A
PHYSICIAN OR POISON CONTROL CENTER.

Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.

Spill Release Procedures:VENTILATE THE AREA. COLLECT SPILLED MATERIAL.
PLACE IN A CLOSED CONTAINER.

Handling and Storage Precautions:AVOID HEAT CONDITIONS WHICH CAN CAUSE
PREMATURE REACTION WITH PRODUCTION OF INTENSE HEAT AND SMOKE. AVOID
BREATHING VAPORS DURING HEAT CURING.
Other Precautions:AVOID EYE AND SKIN CONTACT. AVOID EYE CONTACT WITH OR
BREATHING DUST FROM CUTTING, GRINDING OR SANDING OPERATIONS ON THE
CURED MATERIAL.

Ventilation:SUFFICIENT VENTILATION TO MAINTAIN VAPOR CONCENTRATIONS
BELOW RECOMMENDED EXPOSURE LIMITS. PROPERLY VENT CURING OVENS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE.
Supplemental Safety and Health
KEEP OUT OF THE REACH OF CHILDREN.

Spec Gravity:1.44
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY, VISCOUS PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO, CO2, & NITROGEN DECOMPOSITION
PRODUCTS, INCLUDING POSSIBLE HCN, WHEN SUBJECTED TO EXCESSIVE HEAT
OR FLAME.
Conditions to Avoid Polymerization:AVOID HEAT SOURCES WHICH CAUSE
PREMATURE REACTION (EXOTHERM) WITH PRODUCTION OF INTENSE HEAT AND
SMOKE.

Waste Disposal Methods:INCINERATE BULK PRODUCT AFTER MIXING WITH
FLAMMABLE MATERIAL IN AN INDUSTRIAL OR COMMERCIAL FACILITY.
DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.